';
Flash Freeze – Sub Zero Separation

~ Freeze ~

Flash-freezing is the best available method to extract resin glands & trichomes.

~ Fracture ~

Dry cryo-fracture ruptures frozen plant tissues in preparation for subsequent extraction.

~ Extract ~

Our rotary separation system has been designed to achieve an easy workflow from flash freeze to point-of-collection in multi-use applications.

– Experience efficient extraction with round and clear convenience.

– Extract high quality resin glands.

– Essential post harvest & pre production performance. 

– Benefit from innovative function & technique beyond measure.

– Save time and increase yield with a multi integrated function and rapid workflow.

– Preserve precious botanical essence by flash freezing with efficiency and ease.

– Maintain ideal environment for proper extraction and continuous temperature control.

Commonly extracted undesirable compounds left over from traditional extraction methods may include pigments such as anthocyanin, chlorophyll, tannins, saponins, and lipids from cellulosic materials. We extract only the pure essence of botanical female Resin glands from your dried flowers and plant clippings. Our Patented Cryo-Sieve™ process sifts undesired plant material, stems and particulates leaving only the desired micron rated trichomes to fall through our high quality removable, washable and replaceable monofilament screens. Use our Operating Guide and SOP’s for suggested run times, speeds and load sizes. Our Instruction Manual & Instructional videos help to simply explain this process in an easy step-by-step process.

Separations and Extractions:

Reducing DRY/CURED biomass into a concentrated form of pure resin glands allows for as much as 80%+ faster processing & recovery times across just about any application. May it be Rosin, Distillate, Closed Loop, BHO, Sauce, Diamonds, Moon Rocks, Pre-Rolls, Tinctures, Oils, Salves, Topical’s, Edibles, or Concentrates… The Resinator can help you achieve your goals. The Original Resinator will produce added value from your full dried and cured, as well as fresh frozen residual clippings which are easy to collect from “TOR” after each run cycle. Maceration of full buds/flowers is easily accomplished with Resinator equipment and Co2/H20 separation and extraction processes. You’ll have the option to produce your desire of either choice Kief and/or Bubble Hash. Freeze, Fracture and Extract high quality resin glands instantly to optimize production for a wide variety of DRY/CURED commercial applications including:

Live’ Separations and Extractions:

Sub-Zero temperatures are preferred when making ANY extraction. Particularly, when CBD-A and THC-A levels are at highest levels, which occurs in their live or uncured state. Not only does the Resinator let us extract kief and trim from traditionally DRIED/CURED flowers, but our sub-zero extraction also allows us to work with Live’ aka WET/UNCURED plant matter in any number of “LIVE” applications. Here are a few notable and popular Live’ products you can look forward to adding to your SKU category with help from your Resinator.

– Cryo-Sieve™ WET / Live’ Sifted Kief or Resin Gland Separation 

– Cryo-Trim™ WET/ Live’ Dried Crop-to-Cure™ Blade-less Trimming w CO2

– H20 Extraction /  Live’ Bubble Hash ~ Bubble While You Tumble ~

– Live’ Kief

– Live’ Rosin

– Live’ Wax

– Live’ Diamonds

– Live’ Sauce

– Live’ Resin

– Cryo-Sieve™ DRY / Sifted Kief or Resin Gland Separation 

– Cryo-Trim™ DRY / Blade-less Trimming w CO2

– H20 Extraction / Bubble Hash ~ Bubble While You Tumble ~

– Distillates

– Rosin

– BHO

– Tinctures

– Oil

– Salves

– Topicals

– Edibles

– Concentrates

It’s only because of our use of liquid Co2 that lets us work with Live’ biomass. If you elect, you’ll also be able to process uncured LIVE’ Resin Glands & Trichomes collected from the Resinator Cryo-Sieve™ process to be used in tandem with lyophilization process and proper freeze dry equipment. Note: A freeze dryer is not necessary when working with biomass that has already been dried and cured. It’s only when a secondary refinement of concentrated trichomes is Live’ and accompanied with downstream solventless application that freeze drying is required. If your secondary refinement is going into a closed loop or hydrocarbon system/application then your fresh frozen material and water contained within biomass does not have an adverse reaction to the water molecules and therefore does not need to be sublimated in the lyophilation process, just stored in a deep freezer until ready to process.

Lyophilization, aka; freeze drying is certainly the future, which ’TOR’ is leading the industry in LIVE’ Solventless applications, Crop-to-Cure™ & LIVE’ DRIED technology; The Original Resinator team will be able to assist you in selecting the appropriate type and size freeze dryer(s) for your operation. This method will create more profits by accelerating your timeline and space/labor requirements typically needed with traditional and arduous costly curing room methods. Because of our use of C02, you’ll be able to also process your biomass, flower, kief and bubble hash all in “LIVE” applications. You’ll have fresher product, potency, aroma translating towards higher dollar value due to the incredible preservation and presentation of your finished products and translating to higher customer demand for premium consumables. For clarity, adapting our methodology will allow bypass of traditional flower trimming, drying and curing process to alternatively work with uncured, fresh cut or fresh frozen buds/flowers and hence utilize the entire plant to produce “LIVE RESIN GLANDS” aka; “LIVE KIEF”. Please keep in mind that when it comes to  “Live applications” it is critical to “Maintain Cold Chain”. So you will need to immediately place the biomass within a deep freezer or a cryo-freezer (ultra-low temp freezer) as a staging area to preserve or suspend the biomass for further processing. Whereas, placing the biomass directly within a pre-frozen freeze-dryer for lyophilization process will stabilize the biomass making the product shelf ready within a compressed time period. This establishes the highest value product retention using revolutionary curing methods and stabilizes all biomass appropriately for shelf storage, testing, packaging, distribution and consumption. Hence your products will retain all of  the “high Value” elements; i.e. potency, flavor and marketable appearance.

The Original Resinator brings about a paradigm change in the way trimming, separation and extraction of cannabis and similar plants with resinous glandular trichomes can be carried out. Proving itself time and time again to be one of the most valuable tools in the arsenal of any farm, factory or facility… There is no job too big or too small for The Original Resinator.

Liquid C02: When sifting flowers or sugarleaf, consumption is approximately 1-2 Lbs. of Liquid C02 per 1 Lb. of biomass. However and to ensure that you don’t run out of Liquid C02 we recommend having 2 Lbs. of Liquid C02 per each 1 Lb. of trimming of flowers.

Cost per Lbs of Liquid C02 is approximately $1 per Lbs at retail, while larger volumes of delivered C02 can be purchased for as low as $0.25 per Lbs pending your local supplier. We have customer accounts set up with numerous national gas suppliers affixed with pre negotiated discount rates which we pass along to our customers. Inquire with our team for a gas reference customer account number or for any inquiry regarding C02 questions and common FAQ. You can also refer to our ”Understanding Dewars & Cylinders” section of our website for a thorough description on this subject.

Don’t let the term LIQUID Co2 confuse matters. All that is required to dispense Co2 in its liquid state is a standard high pressure Carbon Dioxide tank with a siphon tube. Also known as a “Co2 Siphon Tank” or “Dip Tube Tank”. The Siphon tank has a tube that runs down the center to dispense the liquid Co2. … Most standard Siphon tanks come in 20, 50 or 75 pounds. These size cylinders work great for anysize operation big or small. Larger cylinders known as liquid cylinders (aka dewars), are also available. Liquid cylinders release much lower pressure than a standard high pressure tank. A standard 50 lb cylinder will release Co2 at 800psi whereas a 180L or 230L ( litre) liquid cylinder will have a limit of 350 PSI. When applying use in a commercial operation we recommend using the larger liquid cylinders. Normally Co2 tanks and cylinders are not purchased, they are rented by the day or week etc. You can still purchase the tanks and get them refilled at any local welding supply shop or Co2 gas supplier. Because of the weight and maintenance we recommend renting them. You can also have the local Co2 supplier deliver to your venue or site for a small fee.

Co2 can evaporate into the air or be recycled by condensation into a cold recovery vessel.  The Resinator is NOT a closed loop, high pressure or Co2 recovery  system and allows for plant material to tumble while “gas” is injected into the chamber for the coldest possible temperatures without recovering the spent gas. This is why it is important to monitor Co2 levels in your work environment. Refer to our “Monitoring Co2” section of our website for a thorough description on this matter.

When utilizing The Original Resinator we are only using the liquid Co2 as a freezing agent. The Original Resinator is NOT a closed loop or high pressure system. Although we operate at sub-zero temperatures we do not enter a subcritical or supercritical state. Co2/Carbon dioxide usually behaves as a gas in air at standard temperature and pressure (STP), or as a solid called dry ice when frozen. If the temperature and pressure are both increased from STP to be at or above the critical point for carbon dioxide, it can adopt properties midway between a gas and a liquid. Carbon dioxide (Co2) is a supercritical fluid, meaning it converts into a liquid form when pressurized. Supercritical carbon dioxide (sCo2) is a fluid state of carbon dioxide where it is held at or above its critical temperature and critical pressure. Subcritical Co2 extraction uses Co2 in its liquid state, below its critical point. At the same time, it is a pure chemical substance that occurs naturally and leaves behind no residues. Accordingly, the Co2 extraction method can help ensure cannabis concentrates are pure, making it a good option for patients in search of a natural form of cannabis extract. Although liquid Co2 does not possess the incredible diffusivity of supercritical fluid, its density is far greater. In fact, 95% of all cannabis extractions are done in the subcritical phase before moving onto the supercritical phase. There is a large variety of quality closed loop high pressure systems out there to choose from when selecting what equipment suits an operation. No matter the choice, as a post-harvest and pre-process tool, The Original Resinator compliments just about any system seeking to optimize secondary refinement of their reduced biomass into a concentrated form. TOR also minimises initial expense of costly equipment needed when making extractions by maximizing throughput and dramatically reducing labor cost. All without sacrificing quality or yield. We see an average of 50% and as much as an 80% improvement in production run times when using reduced biomass from advanced cannabinol and trichome rich separations into processing equipment. This allows for a smaller footprint and lower cost of entry into advanced systems due to increased efficiency.

The Original Resinator